Dealing with a Sudden Water Heater Breakdown: Steps to Take
Dealing with a Sudden Water Heater Breakdown: Steps to Take
Blog Article
This article down below on the subject of How to Troubleshoot and Repair an Electric Water Heater is incredibly enlightening. You should check this stuff out.
Many modern houses use an electrical hot water heater for their heating unit, as a result of its convenience and also ease of use. Nevertheless, much like any other electrical devices, troubles might arise with its use, suddenly. It can be truly frustrating to wake up to a cool shower instead of a warm one or having your bathroom with water that isn't hot enough or even as well hot. Whatever the case might be, hot water heater issues can be quite aggravating. Fortunately, we've made a list of feasible solutions to your hot water heater problems. There are a number of variables that might trigger a lot of these troubles, it could be a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for safety and security. Whatever the issue is, getting it fixed must not pose way too much of a concern if you follow these steps:
Call An Expert:
If after changing all damaged parts and also resetting your temperature level, the water heater still isn't working, you might need to contact a professional plumber for an expert opinion. The trouble with your heating system could be that the hot and cold taps have been switched over or it might be undersized for the quantity of warm water needed in your house. Whatever the instance may be, a professional plumber would certainly help resolve the problem.
Inspect Your Power Supply:
As basic as this may appear, it is very required. Without ample power, your water heater will not operate. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power problem. Inspect if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the issue, just transform it off and on once again. Change any damaged or worn-out fuse. Test the device with power after these changes to see if it's now functioning.
Examine Your Thermostat:
If your water heater still isn't working or the water appearing isn't hot enough, you might need to check the temperature setups on your top thermostat. Make sure the breaker is turned off before doing anything. Open up the gain access to panel as well as press the red button for temperature level reset over the thermostat. This need to help heat the water. Transform the circuit breaker back on and also check if the problem has been solved.
Examine the Burner in the Hot Water Heater:
If it's not a power trouble, then attempt having a look at your burner if it is still functioning. Check each of your burner to ensure the problem isn't with any of them. If any one of them is malfunctioning, change that part and then check whether the hot water is back on.
Final thought
Hot water heater problems are not constantly major. A lot of them are because of small concerns like a blown fuse or worn-out burner. Replacing the damaged components need to work. Nevertheless, if you are still not able to resolve the problem, give a call to your nearest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We are very curious about How to Troubleshoot and Repair an Electric Water Heater and I am praying you enjoyed our post. Sharing is nice. Who knows, you may just be helping someone out. Thanks a lot for taking the time to read it.
Peace of mind? Dial! Report this page